Citizen C70 Especificações descarregar pdf (Página 100)

II Parameters

Base Specifications Parameters

II - 7

【#1020(PR)】 sp_ax Spindle Interpolation

Select "1" when using the spindle for the contour control of NC axis (C-axis).

0: Servo axis is used for contour control.

1: Spindle is used for contour control.

【#1021(PR)】 mcp_no Drive unit I/F channel No. (servo)

Using a 4-digit number, set the drive unit interface channel No. and which axis in that

channel is to be used when connecting a servo drive unit.

[Possible setting range]

0000 to FFFF

[Valid setting range]

1001 to 1010

【#1025】 l_plane Initial plane selection

Select the plane to be selected when the power is turned ON or reset.

0: X-Y plane (G17 command state)

1: X-Y plane (G17 command state)

2: Z-X plane (G18 command state)

3: Y-Z plane (G19 command state)

【#1026】 base_I Base axis I

Set the names of the basic axes that compose the plane.

Set the axis name set in "#1013 axname".

If all three items ("base_I", "base_J" and "base_K") do not need to be set, such as for 2-axis

specifications, input "0", and the parameter will be blank.

Normally, when X, Y and Z are specified respectively for base_l, _J, _K, the following

relation will be established:

G17: X-Y

G18: Z-X

G19: Y-Z

Specify the desired axis name to set an axis address other than above.

---Setting range---

Axis names such as X, Y or Z

【#1027】 base_J Base axis J

Set the names of the basic axes that compose the plane.

Set the axis name set in "#1013 axname".

If all three items ("base_I", "base_J" and "base_K") do not need to be set, such as for 2-axis

specifications, input "0", and the parameter will be blank.

Normally, when X, Y and Z are specified respectively for base_l, _J, _K, the following

relation will be established:

G17: X-Y

G18: Z-X

G19: Y-Z

Specify the desired axis name to set an axis address other than above.

---Setting range---

Axis names such as X, Y or Z

【#1028】 base_K Base axis K

Set the names of the basic axes that compose the plane.

Set the axis name set in "#1013 axname".

If all three items ("base_I", "base_J" and "base_K") do not need to be set, such as for 2-axis

specifications, input "0", and the parameter will be blank.

Normally, when X, Y and Z are specified respectively for base_l, _J, _K, the following

relation will be established:

G17: X-Y

G18: Z-X

G19: Y-Z

Specify the desired axis name to set an axis address other than above.

---Setting range---

Axis names such as X, Y or Z

【#1029】 aux_I Flat axis I

Set the axis name when there is an axis parallel to "#1026 base_I".

---Setting range---

Axis names such as X, Y or Z

【#1030】 aux_J Flat axis J

Set the axis name when there is an axis parallel to "#1027 base_J".

---Setting range---

Axis names such as X, Y or Z

【#1031】 aux_K Flat axis K

Set the axis name when there is an axis parallel to "#1028 base_K".

---Setting range---

Axis names such as X, Y or Z

Axis No.

Not used㧔Set to "0"㧕

Drive unit interface channel No.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 384 385

Comentários a estes Manuais

Darricknus 16 Feb 2024 | 10:14:18

Hello Guys, Glad to Join! :)

Citizen C70 Especificações Página 100

Comentários a estes Manuais

Manuais e produtos relacionados com não Citizen C70